Hanna-instruments HI 83211 Manual do Utilizador descarregar pdf (Página 52)

Phosphate LR

SPECIFICATIONS

Range 0.00 to 2.50 mg/L

Resolution 0.01 mg/L

Accuracy ±0.04 mg/L ±4% of reading at 25 °C

Typical EMC Dev. ±0.01 mg/L

Light Source Tungsten lamp with narrow band interference filter @ 610 nm

Method Adaptation of the Ascorbic Acid method. The reaction between phosphate and the

reagent causes a blue tint in the sample.

REQUIRED REAGENTS

Code Description Quantity

HI 93713-0 Powder reagent 1 packet

REAGENT SETS

HI 93713-01 Reagents for 100 tests

HI 93713-03 Reagents for 300 tests

For other accessories see page 66.

MEASUREMENT PROCEDURE

• Select the

Phosphate LR

method using the procedure

described in the

Method Selection

section (see page 12).

• Rinse, cap and shake the cuvette several times with

unreacted sample. Fill the cuvette with 10 mL of sample

up to the mark and replace the cap.

• Place the cuvette into the holder and close the lid.

• Press the Zero key. The display will show “-0.0-” when the meter is zeroed and ready for

measurement.

• Remove the cuvette and add the content of one packet of

HI 93713-0 reagent. Replace the cap and shake gently

(for about 2 minutes) until the powder is completely

dissolved.

10 mL

PHOSPHATE LOW RANGE

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 67 68

Sem comentários

Hanna-instruments HI 83211 Manual do Utilizador Página 52