Hanna-instruments HI 83214 Manual do Utilizador descarregar pdf (Página 26)

CHLORINE, TOTAL

Chlorine, Total

10 mL

SPECIFICATIONS

Range 0.00 to 5.00 mg/L Cl

Resolution 0.01 mg/L

Accuracy ±0.03 mg/L or ±4 % of reading @ 25 °C, whichever is greater

Light Source Tungsten lamp with narrow band interference filter @ 525 nm

Method Adaptation of the EPA method 330.5 and

Standard Methods for the Examination of

Water and Wastewater, 20

edition

, 4500-Cl G, DPD method. The reaction between

chlorine and the DPD reagent causes a pink tint in the sample.

REQUIRED REAGENTS

Code Description Q.ty/test

HI 93711-0 DPD Powder Reagent 1 packet

REAGENT SETS

HI 93711-01 Reagents for 100 tests

HI 93711-03 Reagents for 300 tests

For other accessories see page 68.

MEASUREMENT PROCEDURE

• Select

Chlorine, Total

method following one of the procedures described in the “Method Selection”

section (see page 15).

• Take an empty vial.

• Fill the vial with 10 mL of unreacted sample, then replace the cap. This is the blank.

• Place the vial into the holder and push it completely down.

• Press the Zero key. The instrument will perform a zero sequence and after a few seconds the display

will show “-0.0-”. Now the meter is zeroed and ready for measurement.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 71 72

Sem comentários

Hanna-instruments HI 83214 Manual do Utilizador Página 26