Hanna-instruments HI 99163N Manual do Utilizador descarregar pdf

Instruction Manual

HI 99163

Portable Waterproof

Meat pH Meter

www.hannainst.com

Dear Customer,

Thank you for choosing a Hanna Instruments

Product.

Please read this instruction manual carefully

before using the instrument.

If you need additional technical information,

do not hesitate to e-mail us at

[email protected]

This instrument is in compliance with the

directives.

All Hanna Instruments meters are warranted

for two years against defects in workmanship

and materials when used for their intended pur-

pose and maintained according to instructions.

The probes are warranted for a period of

six months.

This warranty is limited to repair or replacement

free of charge. Damage due to accidents, misuse,

tampering or lack of prescribed maintenance are

not covered.

If service is required, contact the dealer from

whom you purchased the instrument. If under

warranty, report the model number, date of pur-

chase, serial number and the nature of the prob-

lem. If the repair is not covered by the warranty,

you will be notified of the charges incurred. If the

instrument is to be returned to Hanna Instruments,

first obtain a Returned Goods Authorization Num-

ber from the Customer Service department and

then send it with shipment costs prepaid. When

shipping any instrument, make sure it is properly

packaged for complete protection.

All rights are reserved. Reproduction in whole or in

part is prohibited without the written consent of the

WARRANTY

PRELIMINARY EXAMINATION

Remove the instrument from the packing ma-

terial and examine it carefully to make sure

that no damage has occurred during ship-

ment. If noticeable damage is evident, notify

your dealer.

Note: Save all packing material until you

are sure that the instrument func-

tions correctly. All defective items

must be returned in the original pack-

ing together with the supplied ac-

cessories.

HI 99163 is a portable pH and temperature

meter with a special probe, dedicated to

the application in slaughter houses.

The FC 232D probe has been specially de-

signed with a stainless steel blade tip for

meat penetration.

Moreover, a built-in temperature sensor al-

lows simultaneous pH and temperature

readings and a mini amplifier renders mea-

surements impervious to noise and electri-

cal interferences.

The meter is supplied in a rugged carrying

case, complete with:

• FC 232D amplified pH/temperature probe

with FC 099 stainless steel blade, DIN

connector and 1 m (3.3') cable

• HI 70004 pH 4.01 buffer, 20 mL sachet

• HI 70007 pH 7.01 buffer, 20 mL sachet

• HI 700630 Acid cleaning solution for meat

grease and fats, 20 mL sachet (2 pcs.)

• batteries and instructions

GENERAL DESCRIPTION SPECIFICATIONS

Range -2.00 to 16.00 pH

-5.0 to 105.0°C / 23.0 to 221.0°F

Resolution 0.01 pH / 0.1°C / 0.1°F

Accuracy ±0.02 pH

(@20°C/68°F) ±0.5°C up to 60°C; ±1°C outside

±1°F up to 140°F; ±2°F outside

Typical EMC ±0.02 pH

Deviation ±0.2°C or ±0.4°F

Temp. Compensation Automatic

pH Calibration Automatic, 1 or 2 point

with 2 sets of standardized buffers

(4.01/7.01/10.01 or 4.01/6.86/9.18)

Probe (included) FC 232D

amplified pH/temperature probe

Battery Type 3 x 1.5V AA / IEC LR6

Battery Life Approx. 1500 hours

Auto-off After 8 minutes of non-use

Environment 0 to 50°C; RH 100%

Dimensions150 x 80 x 36 mm (5.9 x 3.2 x 1.4”)

Weight 210 g (7.4 oz.)

FC 232D Amplified pH probe with stain-

less steel blade tip, built-in

temperature sensor, DIN con-

nector and 1 m (3.3') cable

FC 098 20 mm stainless steel blade

FC 099 35 mm stainless steel blade

HI 70004P pH 4.01 buffer solution, 20 mL

sachet (25 pcs.)

HI 7004L pH 4.01 buffer solution, 500 mL

HI 70006P pH 6.86 buffer solution, 20 mL

sachet (25 pcs.)

HI 7006L pH 6.86 buffer solution, 500 mL

HI 70007P pH 7.01 buffer solution, 20 mL

sachet (25 pcs.)

HI 7007L pH 7.01 buffer solution, 500 mL

HI 70300M Storage solution, 230 mL bottle

HI 70300L Storage solution, 500 mL bottle

HI 7061M General purpose cleaning so-

lution, 230 mL bottle

HI 7061L General purpose cleaning so-

lution, 500 mL bottle

HI 700630P Acid cleaning solution for meat

grease and fats, 20 mL sachet

(25 pcs.)

HI 70630M Acid cleaning solution for meat

grease and fats, 230 mL bottle

HI 70630L Acid cleaning solution for meat

grease and fats, 500 mL bottle

HI 70631M Alkaline cleaning sol. for meat

grease and fats, 230 mL bottle

HI 70631L Alkaline cleaning sol. for meat

grease and fats, 500 mL bottle

HI 70632M Cleaning & disinfection solu-

tion for blood products, 230 mL

HI 70632L Cleaning & disinfection solu-

tion for blood products, 500 mL

HI 710007 Blue shockproof rubber boot

HI 710008 Orange shockproof rubber boot

HI 721312 Hard carrying case

ACCESSORIESLCD DESCRIPTION

1. Automatic Temperature Compensation

indicator

2. Stability indicator

3. Battery percentage

4. pH calibration indicator

5. Low battery indicator

6. Selectable temperature unit

7. Secondary display

8. Primary display

IST99163R1 05/05

Hanna Instruments reserves the right to

modify the design, construction and appear-

ance of its products without advance notice.

1 2

Resumo do Conteúdo

Página 1 - HI 99163

Instruction ManualHI 99163Portable WaterproofMeat pH Meterwww.hannainst.comDear Customer,Thank you for choosing a Hanna InstrumentsProduct.Please read

Página 2 - BATTERY REPLACEMENT

To connect the probeWith the meter turned off, connect the FC 232Dprobe to the DIN socket on the top of the meter byaligning the pins and pushing in t

Comentários a estes Manuais

Sem comentários

Hanna-instruments HI 99163N Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Instrumentos de medida Hanna-instruments HI 99163N. Hanna Instruments HI 99163N User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Hanna-instruments HI 99163N