Hanna-instruments HI 98170 Manual do Utilizador descarregar pdf (Página 28)

• If RCL mode was invoked while the instrument

was in ISE range: the last ppm memorized

reading on the primary LCD and the record

number on the secondary LCD.

Press 2nd then SETUP while in RECALL mode and the instrument will toggle

between the record number on the secondary LCD and the current displayed

information. Use the ARROW keys to select another record.

Press 2nd then MODE and the instrument will display the next logged

parameter as shown in the table below:

Note: If in Rel mV RECALL mode regarding the slope, the instrument will

display “----” message on the primary LCD.

Last displayed parameter is “dEL” message on the

primary LCD and the record number on the secondary

LCD.

Note: Pressing 2nd then SETUP the instrument toggles between record

number and all records.

• Press 2nd then CLR to delete the selected or all records. The “nuLL”

message will be displayed on the primary LCD for the selected record.

• If “dEL ALL” option was selected, all logged data are deleted and the

instrument returns to measurement mode.

Press 2nd then RCL at any time to return to measurement mode.

OFFSET Offset value OFFS

DATE Month & day Year

TIME Hour & minutes Seconds

Parameter Primary LCD Secondary LCD

SLOPE Slope value SLP

mV mV reading Temperature

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

Sem comentários

Hanna-instruments HI 98170 Manual do Utilizador Página 28