Hanna-instruments HI 98230 Manual do Utilizador descarregar pdf (Página 7)

1312

TO SCAN GLP DATA

CODE 10 - Viewing pH GLP

• Select the code 10

• The " pH GLP" message will scroll twice on LCD.

• Electrode calibration data are verified to be within acceptable

values. If not the message "Old probe" or "Dead probe" will scroll

once on LCD, depending on calibration data.

• The LCD will then display the instrument identification (ID) code.

• Press  to scan remaining data, in the following order:

last calibration date (DD.MM)

last calibration year

last calibration time (hh.mm)

electrode offset value in mV ("OF" appears in the lower LCD)

electrode slope in mV/pH ("SL" appears in the lower LCD)

first point calibration buffer

second point calibration buffer (only if a 2-point calibration has

been performed).

Note: Data can be viewed in reverse order pressing the  key.

• Press ALT and FNC to return to function selection mode.

Code 11 - Viewing mV GLP (HI98240 only)

• Select code 11. The message "Volt GLP" will scroll twice across LCD.

• The LCD will then display the instrument identification (ID) code.

• Press  to scan remaining data, in the following order:

last calibration date (DD.MM)

last calibration year

last calibration time (hh.mm)

first calibration point

second calibration point

third calibration point (if present).

• Press ALT and FNC to return to setup mode.

CODE 12 - Printing GLP Data

• Select code 12. The message "GLP data printing" will scroll across

LCD.

• The meter will then print a complete set of the following GLP

data:

a - Instrument identification (ID) code

printed at that moment. If printout is stopped the LCD will show

the last printed sample number. It is then possible to select

another sample.

• Press the ALT and FNC keys to return to setup mode.

Viewing Logged Data

• Press RANGE to view data of the selected sample. Data will be

displayed in the following order:

pH or mV (mV reading available in HI98240 only)

temperature

date

time

• If RANGE is pressed when the time is displayed, the LCD will pass

to the next Sample number.

• It is then possible to scroll the data of the next sample by

pressing RANGE or select a different sample by the arrow keys.

• to return to setup mode, press ALT and FNC when the meter

displays the sample number.

CODE 01 - Lot Summary Printout

• Select the code 01.

• The message "Lot table Printing" will scroll twice on LCD.

• The meter will then print a complete set of information based on

the data stored in memory:

a - lot number

b - logging interval

c - starting date

d - number of samples

e - starting time

f - number and measure unit of

the logged channels.

Note: For lot 00 the number of samples only will be printed.

DELETE SET DATA

• Select code 05 to delete the Log on Demand data or code 06 to

delete the Timed Log Data.

• A scrolling message will be displayed.

• Press the ALT and CFM keys to confirm deletion.

• It is also possible to escape without data deletion pressing the ALT

and FNC keys.

1 2 3 4 5 6 7 8 9 10 11 12 ... 20 21

Comentários a estes Manuais

Sem comentários

Hanna-instruments HI 98230 Manual do Utilizador Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Hanna-instruments HI 98230